Main Menu
Main Content

5.4FT Animatronic The Nun Halloween Decoration

Sale - Save 30%
View Size Chart
Item # GEM229156
Items Included
  • Animatronic
  • Stand
  • Power Cord
  • Assembly Instructions
Recommended Accessories
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add
Add

Small Moments,
Monster Memories

Follow us @halloweendotcom and tag us with #yesfuncostumes to be featured here.

Product Information

Size Chart
Size Measurement Standard Metric
Standard Height 5 Feet, 4 Inches Tall 5 Feet, 4 Inches Tall
Features
  • Metal stand, plastic and polyester fabric clothing
  • Volume control, on (try me), sensor modes, can be activated using a step pad ( sold separately )
  • She bends at the waist, hands and body lunge forward, eyes light up, eerie music plays
  • Can be used indoors or in a covered outdoor location (shouldn't be allowed to get wet)
  • If used outdoors, must be plugged into a GFCI (ground fault circuit interrupter) outlet
  • Measures 5 feet, 4 inches tall
  • Officially licensed
  • NOTE: The plug on this item may require an adapter (not included) for use outside the United States

Evil Has Taken Its Final Vow

She watches in silence. She waits in the shadows. And when the time is right... she strikes! The Nun Animated Halloween Decoration is a terrifyingly lifelike recreation of Valak, the demon that has haunted The Conjuring universe. With her piercing yellow eyes, deathly pale face, and wicked, fang-lined snarl, she is the embodiment of pure evil. Whether standing in the corner of a dimly lit room or guarding the entrance to your haunted house, this sinister sister will ensure that no soul leaves unscathed.

The Conjuring Villain Made Real

Designed by Made By Us, this officially licensed animatronic brings the horror of The Nun directly into your home. Dressed in a flowing black habit with a tattered brown belt and sinister cross, she looks as though she has just stepped from the depths of a cursed monastery. Every eerie detail, from her cracked, ashen skin to the deep-set, glowing demon eyes, captures the essence of Valak's terrifying presence.

Unholy Movement and Haunting Sounds

Don't let the stillness fool you—The Nun is never truly at rest. The moment she is motion-activated, she lunges forward and backward, as if preparing to snatch her next victim. Her yellow demon eyes burn with unholy light, locking onto her prey with a stare that chills to the bone. And just when you think you've braved the worst, the chilling music from The Nun begins to play, only to be shattered by a soul-piercing scream that will leave guests reeling in terror.

Summon the Ultimate Horror Icon This Halloween

Perfect for haunted houses, horror movie displays, or demonic exorcism scenes, this lifelike and deeply unsettling animatronic ensures that the nightmares don't end when the movie does. If you dare to bring her home, just remember—she's always watching.

Questions & Answers

Q: Hi will this animatronic come with her cross necklace I would like to know before i purchase this? Thanks for your time and I hope I hear back from you soon! (1 Answer)
Asked by Lee MCGhee | November 3, 2025
Monster Responds...
Our information doesn't call out a cross necklace as part of the animatronic's costume details, so I can't confirm it ships with one. What we do know is that the includes list covers the animatronic itself, the stand, a power cord, and assembly instructions, and that's exactly what ships.
(AI Generated Answer)

Q: I bought one and got her put together, Tried her out and she worked just fine. The next day I went to put her out, and the noise/movement kept stopping halfway through. What could be the problem? (1 Answer)
Asked by T.M. | October 31, 2025
Monster Responds...
If she's stopping partway through her cycle, the most common culprit is the activation mode she's set to. She has three modes: try me, sensor, and a step pad mode for the separately sold step pad. If she's in sensor mode, anything that briefly interrupts the sensor mid-cycle, like a passing shadow or a shift in her position, can cause her to reset or stall. Try switching her to a different mode and see if the behavior changes. If you're running her outdoors, also double-check that she's plugged into a GFCI outlet, since any interruption in power delivery can cause exactly the kind of stopping you're describing.
(AI Generated Answer)

Q: Is there a way to position the nun so that she's stood up straight looking at you when not activated, as opposed to looking down?
Thank you! (1 Answer)
Asked by Anonymous | October 31, 2025
Monster Responds...
Her resting position is bent at the waist looking downward, and that's the default pose she returns to between activations. The lunge forward is her activated motion, so there isn't a built-in way to lock her upright when she's at rest.
(AI Generated Answer)

Q: Is this product new or used
(1 Answer)
Asked by Anonymous | October 27, 2025
Monster Responds...
This animatronic ships brand new directly from us. You'll get the Nun animatronic, stand, power cord, and assembly instructions, all fresh out of the box and ready to set up.
(AI Generated Answer)

Q: Does the bun actually lunge forward? (1 Answer)
Asked by Anonymous | October 4, 2025
Monster Responds...
Yes, she really does lunge forward! When activated, she bends at the waist, thrusts her hands and body forward, lights up her eyes, and plays eerie music.
(AI Generated Answer)

Q: So on the nun thing on the motor that moves around there's a piece of Styrofoam that has two zip ties on it. Is that piece of foam supposed to be removed or does it stay so it knows where to stop it doesn't say in the directions whether to remove it or not and since it has zip ties I'm thinking it needs to be removed but it appears to be glued on (1 Answer)
Asked by gary | September 27, 2025
Monster Responds...
That foam piece with the zip ties is a shipping spacer meant to protect the motor mechanism in transit, and it should be removed before you power the animatronic on. The zip ties are there to hold it securely during shipping, which is why it may feel snug or appear attached. If it seems glued, work it free gently, since leaving it in place would prevent the motor from moving through its full range of motion.
(AI Generated Answer)

Q: When used outdoors it needs to be plugged in? But I also read in the description that it can be operated with four AA batteries? (1 Answer)
Asked by Estuardo  | September 4, 2025
Monster Responds...
For outdoor use, this animatronic needs to be plugged into a GFCI outlet. A power cord is included, and that is the only power option we have for this decoration, so the battery information you came across doesn't apply to this item.
(AI Generated Answer)

Q: Are all Animatronics water proof? Can they be left out in the rain? (1 Answer)
Asked by Alex | March 14, 2025
Monster Responds...
This Nun animatronic is not waterproof and should never be allowed to get wet. She can be set up in a covered outdoor spot, but open-air placement where rain could reach her is a no-go. If you do use her outside, she also needs to be plugged into a GFCI outlet for safety.
(AI Generated Answer)

Reviews 

There are no reviews for this item yet. Be the first to write a review!

Write A Review
GEM229156_The Nun Animatronic Video